Solutions to small faults of school bus

- Oct 29, 2019-

In the process of school bus driving, it is inevitable to encounter such and such problems, which need to be dealt with immediately, so it is important to learn some simple troubleshooting methods. Here are some simple methods.


Oil tank: if oil leakage is found in the oil tank, clean the oil leakage place, and apply soap or bubble gum to the oil leakage place to temporarily block the oil. If conditions permit, repair with epoxy resin adhesive, the effect is better.


Oil pipe: if the oil pipe joint leaks, wrap the cotton yarn around the lower edge of the horn, then tighten the oil pipe nut and the oil pipe joint; chew the bubble gum or maltose into a paste, and apply it to the nut seat of the oil pipe, and then seal it after it dries.


Brake: if you feel that the brake is not as easy to use as before, the quickest solution is to step on the brake a few feet while waiting for the red light, you can improve the phenomenon. If the improvement effect is not obvious, or the brake system pad has reached the service life, you need to replace and repair it immediately.